DeWalt are part of the “Stanley Black & Decker” group.
Brands
So not surprising that they use the same cases…
Just noticed that I’d been beaten to it by Daverw
That would seem more logical - there would be little point going to the expense of tapering that large piece of aluminium stock you showed in your photo unless it was load bearing (in bending).
I have used a Beal rope cleaner for a few years now. They work brilliantly. I typically fill two 40L flexible builders buckets with water and transfer the rope from one to the other and back again a few times. I find they work even better if you keep the brush submerged when pulling the rope...
The Hickman Sea Sled was the forerunner of the Boston Whaler, with some modifications to avoid the issues with prop ventilation in rough water that plagued some of the Sea Sleds.
Classic Whaler: Boston Whaler: Reference: 13 Foot: Original Hull Design
On my old seacocks I managed to undo the nut a couple of turns, then it didn’t go any further. That allowed me just enough space to pull the seacock outboard a few mm and use a multi tool fitted with a steel cutting blade to cut through the threaded shaft. Came off in no time with very little...
me Too. The image quality is surprisingly good, viewed on my iPad.
you need to watch focal lengths - many of them are very short focus and anything over about 20cm away is very blurry.
Incidentally, the link that Redwing posted says that they have been given funding by FASS to install the rest of the 100 ecomoorings in 2024. Are the £10 fees from these going to go to the sea horse trust as well?
Installation of eco-moorings at Studland Bay | boatfolk
which states..
boatfolk and The Seahorse Trust
Studland Bay is a popular destination for boaters, however the dropping of anchors has damaging consequences for both the seabed and the creatures which call it their home. That's why we've...