New to me, but cannot see hull number, SSR registration now out of date but does give a 049 number. can't see it anywhere on the hull.
Anyone know where they put it?
Sorry Wolf 1200 Generator.
Used,no longer needed and recently serviced, runs first pull. Will run either to top up batteries/ vacuum cleaner/ small power tools [ sander or drill etc ], power washer.
Not sparkling new but most useful. £120. Could deliver SW, if amicably by arrangement.
My Chinese heater unit that replaced a webasto heater has worked well for 2 seasons now but my memory of how I got it going has failed!!
The control unit is one with 5 buttons around the display. The two on the left have a spanner above and OK below. to the right is up>, on/off and down<.
[the...
I decided to remove and clean out some of my larger lockers up front. Mainly Longish ropes that I have accumulated along with odd lengths of chain that "might come in useful".
On removal back home I decided to weigh them all. Total was 114kgs! And I had already taken the two large Gas bottles...
Large bits of rope. 33m of white 3 strand 14mm diameter. £50. 32m of 25mm diameter white nylon £90. 40m of green floating octoplat. £45. 2 bits of 24mm diameter black one with spliced eye.£10 each.
Dinghy bits. prefer to sell as a whole - £30
Yacht bits and bobs. Prefer to sell as a whole...
With the sea being warmer this year and looking like it will continue in the future, I note that fouling of the hulls is considerably worse this year than normal. Is this the case for other parts of Uk?
Used but working, technodrive marine gearbox TMC 40, 2x reduction, used on beta 13.5 but removed with engine that has been replaced.
Oil removed so can courier if wanted.
£325
Not sure which forum to post this but........What tax implications are involved if one was to buy a boat which is either tax free/ tax paid in the Antipodes and get it back to UK?
Kill cord detached and still no spark from a new plug removed from the body, but touched to ground on engine. I read somewhere that a ohm meter could tell whether the ignition coil could give an indication if it worked. True, and if so what should be a "good" reading?
Removed from boat after I upgraded, and only less than 1 year old.
Works perfectly though, and at £250 new and also one ebay, all I ask is £100 + postage.
No tax.
I have duralac, and realise the problem of dissimilar metal corrosion. Can I just dip the end of the bolt in duralac before threading and tightening the bolt?
It then passes through a rubber mat and grp deck to a large s/s washer and two nuts to affix.