simonfraser's latest activity

just cos they are new, how do you know they will inflate properly ?

I’m at a loss why the technician didn’t replace the main seal anyway while he had it on the bench. You have already incurred most of the...

depends how You value the boat you're not there to please the current owner, however you may realy want the boat ;)

so, how did the water get in :unsure:

If all of the oil was like the picture I would say that more than slightly milky. Just my non expert thought.

Sorry to cause offence. Only trying to make a light-hearted comment. In fairness your pic doesn’t show the other end. It would horrify...

'bolt type shackle' protrudes more, especially on the split pin side that is going to catch on my bow gear :(

full 8mm came with the boat, now 7m of 8mm and a lot of nylon, don't know re Gx i had full 6mm with a slightly larger / heavier boat -...

As said fit the hinges first. Then find a piece of wood rod that will hold it up. See how it all pans out. Then think of something...

tnx J 'Simon - realise that if your shackles locks up in the anchor slot then the tension on the shackle will be at an angle. If...

If you're careful with the drill, you can still seize them with a monel wire, even with most of the lug cut off..

Tnx Jonathan The omega gap is indeed too small, just checked on the boat Have ordered 0.75T Crosby bow shackle, biggest that will fit...

Loctite 242 works very well. No softening underwater, no loss of strength with time.

Hi provided it all fits, i can use the black pin through the chain ? and the red U through the anchor shaft to allow for sideways...

def needs the remote control machine gun the deck, if only for intimidation :ROFLMAO: